Products
News
Reactor structure
Time:2018-05-31 Click:990
The reactor consists of a kettle body, a kettle lid, a jacket, a stirrer, a transmission, a shaft sealing device, and a support. The stirring device can use multi-layer stirring blade when the high diameter is relatively large, and can also be optionally matched according to the user's requirements. The jacket is set outside the kettle wall, or the heat exchange surface is set inside the tank, and the heat exchange can also be performed through the outer circulation. Support seats are supported or ear supports. More than 160 revolutions above the speed should be used gear reducer, the number of openings, specifications or other requirements can be designed and manufactured according to user requirements.
1, Packing seals are usually applied under normal or low pressure conditions. Generally, the pressure is less than 2 kg.
2, in the general medium pressure or vacuum conditions will use mechanical seals, the general pressure is negative pressure or 4 kg.
3, in the case of high pressure or high medium volatility will use magnetic seal, the general pressure of more than 14 kg. In addition to magnetic seals that use water to cool down, other seal types will increase the cooling jacket beyond 120 degrees.
1, Packing seals are usually applied under normal or low pressure conditions. Generally, the pressure is less than 2 kg.
2, in the general medium pressure or vacuum conditions will use mechanical seals, the general pressure is negative pressure or 4 kg.
3, in the case of high pressure or high medium volatility will use magnetic seal, the general pressure of more than 14 kg. In addition to magnetic seals that use water to cool down, other seal types will increase the cooling jacket beyond 120 degrees.
- Prev:Heat exchanger introduction
- Next:none
Hot News